Record Power Point and Tailstock Set

MK2 Drive Point
Offers a firm grip on the wood thanks to its opposing tooth profile.
The centering point facilitates positioning.
The counter-rotating tooth pattern reduces the risk of wood splintering.
Sharp edges facilitate penetration into the wood.
A milled surface limits the depth of penetration into the wood, thus reducing the risk of splintering.
Especially suitable for harder woods.

22mm Tailstock with MK2 Taper
The same high-strength alloy body used in Hawk drive points.
Industry-standard point with a 60° angle for balanced penetration and support.
The sealed rigid ball bearing absorbs longitudinal and lateral forces during rotation.
Also ideal for holding bowls and for face-grain work.