Gorilla Instant Adhesive Brush & Nozzle

Gorilla Instant Adhesive Brush & Nozzle features a precision pointed nozzle and fine bristle brush that allows the user to control the application of the instant adhesive, making it perfect for any project.

12g container

How to use
PREPARE
All surfaces must be clean and dry. Not suitable for polypropylene (PP) or polyethylene (PE) plastics.

APPLY
To use the nozzle, unscrew and remove the top cap.

To use the brush, unscrew the entire cap and brush along the inside edge of the can to remove excess adhesive.

Apply a small amount of Gorilla Instant Adhesive to a surface. It is recommended to use only one drop per 6.5 cm². Excess adhesive may delay or prevent adhesion.

PRESS
Press the two surfaces together for 10-45 seconds. Drying time may vary depending on the amount of adhesive and the type of surface. Full curing is achieved within 24 hours.

STORAGE
After each use, remove any adhesive residue from the neck or nozzle of the can with a dry cloth and replace the cap tightly. Make sure no residue gets into the can. Store in a cool, dry place, out of the reach of children and animals.