Gorilla Contact Glue

The versatile and flexible adhesive that is 100% waterproof.

Gorilla Contact Glue is a clear, flexible, fast-setting adhesive that creates a strong, permanent bond. Because it is paintable and waterproof, it is perfect for indoor and outdoor projects! So, don't worry if it ends up in the washing machine or in the rain. It is repositionable and dries clear, making it the perfect multi-purpose glue.

75gr tube

PREPARATION
Surfaces must be clean and dry.

APPLICATION
Gently squeeze the tube by the folded end to dispense the product slowly through the nozzle. Do not apply too much pressure to the tube. Apply the adhesive to each surface to be glued. Best results are obtained if applied at room temperature (10ºC to 32ºC).

INSTALLATION
Allow the adhesive to partially dry.

For maximum bond strength: wait approximately 2 minutes before bonding surfaces.

For repositional bonds: wait approximately 1 minute before bonding surfaces. Reposition for 2-4 minutes depending on surface type.

Firmly press surfaces together. Allow a minimum of 24 hours for full cure. Cure time may increase with lower temperatures and/or if used on non-porous surfaces.

CLEANUP
Remove uncured adhesive with a dry cloth and clean with acetone, isopropyl alcohol or citrus-based solvents according to manufacturer's instructions. Cured adhesive can be removed by scraping the surface. After each use, wipe nozzle with a dry cloth and replace cap tightly. Store in a cool, dry place away from children and animals.

Note: Do not use on food contact surfaces. Do not dry clean. May damage finished surfaces. Paintable: When fully cured.