JET router table with table extensions

The robust cast iron tabletop with steel table extensions offers a generous work surface of 1.060 × 360 mm. This allows for a wide variety of milling operations to be carried out comfortably, precisely and efficiently.
Parallel and angle stops ensure even pressure on the workpiece and hold it securely in position – for precise and controlled milling results.
The 3 mm thick mounting plate has four pre-drilled mounting holes for routers. Additional holes for plunge routers with a diameter of up to 200 mm can easily be drilled if required.
The four included reducing rings allow the 83 mm center bore to be flexibly adapted to different milling cutter sizes.
The router table is also suitable for straightening and planing board edges. Thanks to the fine adjustment mechanism, the outfeed fence can be easily positioned offset from the infeed fence.

Advantages and benefits:

Suitable for router bits with a diameter of up to 200 mm
Table extensions - easily removable and reattached
With on/off switch for starting and switching off the router.
Includes connection for chip extraction.
The milling table can be securely attached to a workbench or table using pre-drilled holes.
Including angle stop
Technical information
Power up to 2.700 W
Table size 610 x 360 mm
Table size including extensions: 1.030 x 360 mm
Center bore of table Ø 83 mm
Includes 4 reducing rings 74 | 54 | 47 | 32 mm
Extraction port 57 / 100 mm
Working height 350 mm
Steel mounting plate thickness: 3 mm
Weight 23 kg
Delivery
router table
2 x table extension
steel mounting plate
(Delivery without router!)